SONORE by Simple Design

the sound has to be in concert with the music.......


SOtM dX-USB-HD Audiophile Asynchronous USB Interface for 24/192 Playback:
(AES/EBU, SPDIF Toslink, SPDIF RCA Outputs w/Optional External Power Input)


The SOtM dX-USB-HD is an audiophile asynchronous USB interface for 24/192 playback. This interface includes AES/EBU, SPDIF Toslink and SPDIF RCA ouputs  to insure compatibility with your DAC of choice. This interface automatically switch's between USB power and external power should you decide to audition with an external power source. The external power source can be a battery or a linear supply. When using USB power the interface has a unique design incorporating an ultra low noise regulator circuit. This interface also has dual full size high quality oscillators.

dX-USB-HD FEATURES:
USB input
USB specification 2.0 high speed
USB audio specification 2.0
USB B type connector
Sampling rate : 44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz, 192KHz
Bit-depth : 16bit ~24bit, PCM

Coaxial output
Output impedance : 75Ω
Minimum output voltage : 0.5 Vpp
Sampling rate : 44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz, 192KHz
Bit-depth : 16bit~24bit, PCM

Optical output
Maximum data rate : 12.8Mbps(NRZ code)
Output power range: -21dBm ~ -15dBm
Peak emission wavelength : 650nm
Sampling Rate : 44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz, 192KHz
Bit-depth : 16bit~24bit, PCM

AES/EBU output
Output impedance : 110Ω
Minimum output voltage : 2 Vpp
Sampling Rate : 44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz, 192KHz
Bit-depth : 16bit~24bit, PCM

Power requirement
USB power : +5Vdc
External power range: +7Vdc ~ +12.6Vdc
Power : 500mA >

ASIO support
ASIO 2.2 specification

OS support

Linux (kernel with high speed USB 2.0 support)
Windows XP with SP3 (32 bit)
Windows Vista with SP2 (32 bit)
Windows Vista x64 with SP2 (64 bit)
Windows 7 (32 bit)
Windows 7 x64 (64 bit)
Mac OS-X Snow Leopard

Dimension
Width : 105 mm
Height : 53 mm
Depth : 150 mmDual full size high quality oscillator
Weight : 1 Kg >

Indicate LED
Power source x 2
Sampling rate x 4

Power Regulation circuit
Ultra low noise regulator circuit
USB power only operating
External power input connector for external power supply(8 ~ 12.6Vdc)
Automatic power source switching

Component
400/500MIPS 32bit multi-threaded processors
Ultra high speed RS422 driver for AES/EBU, Coaxial
TOSLINK optical connector
PPS film chip capacitor
Conductive polymer capacitors
Audio grade electrolytic capacitors
Dual full size high quality oscillators

MSRP = $450 USD


SOtM mBPS-d2s Intelligent Battery Power Supply for the SOtM dX-USB-HD:
(Dual battery power supply with select switch in a matching case)


mBPS-d2s FEATURES:
Power input
Connector: 5.5mm x 2.1mm dc jack
Voltage: 9Vdc
Current: 1.5A

Power output
Connector: 5.5mm x 2.1mm dc jack
Battery output voltage: 6.5Vdc ~ 8.4Vdc
Current: 1.5A

Protection
Input over current
Output short
Battery over voltage
Battery under voltage

Dimension
Width : 105 mm
Height : 53 mm
Depth : 150 mm
Weight : 700g

MSRP = $400 USD


SOtM tX-USB Audiophile PCI to USB Audio Card:
(Compliant with USB 2.0)


The SOtM tX-USB is an audiophile PCI to USB audio card like no other. This audio card has a unique design incorporating a power line noise filter. It then has individual ultra low noise regulators to power the usb devices attached, the on board ultra low jitter clock and the on broad PCI host controller. You can also use the audio card's power connector (4 pin Molex) to supply it with your own linear or battery power supply for an additional boot in performance. The audio card also has a convenient switch to turn off the power on the USB cable all together. It simply does not get any better than this! 

tX-USB FEATURES:
PCI USB interface chip set
Compliant with USB 2.0
All ports can handle high-speed (480 Mbps), full-speed (12 Mbps), and low-speed (1.5 Mbps)
32-bit 33 MHz host interface compliant with PCI specification revision 2.2
Supports 3.3 V PCI

Power input
Input voltage: +12.0 V (+0.5 V,-0.5V)
Input current: 2A max on / off
4pin IDE power connector

USB port power
Output voltage: +5.0 V (+0.5 V,-0.25V)
Output Current: 0.5A max
Over current protection: 1.0A at 20 C

Operating environment
Operating temperature: 0 C ~ 40 C
Storage temperature: -10 C ~ 50 C
Operating & storage humidity: 10% ~ 90%

OS support
Linux (kernel with high speed USB 2.0 support)
Windows 2000 SP4
Windows XP SP2
Windows Vista
Windows 7
OS-X v10.x

Includes
Short and long pci trim plate

MSRP = $300 USD


SOtM In-Line SATA Power Noise Filter:
(Click on the image for a flow diagram)


The SOtM In-Line SATA Power Noise Filter is a must have computer audiophile product. This device has a unique design incorporating individual 12V, 5V, and 3,3V RF noise filters along with ripple noise filters. The sata data transmission is not altered. We recommend these for use on spinning drives and on sold state drives.

MSRP = $65 USD


SOtM In-Line Fan Power Noise Filter:
(Click on the image for a flow diagram)


The SOtM In-Line Fan Power Noise Filter is a must have computer audiophile product. This device has a unique design incorporating a 12V RF noise filter along with ripple noise filter.

MSRP = $25 USD





Email us at: sales
Copyright Simple Design, LLC
All Rights Reserved